Concepts NREC Authored Papers
- Carbon Dioxide Capture and Sequestration By Integrating Pressure Swing Adsorption With An Open Cycle Supercritical Co2 Brayton Power Generation System
Presented At: 2018 ASME Power & Energy Conference & Exhibition on Nuclear Engineering
- Development of A Meanline Model for Preliminary Design Of Recirculating Casing Treatment In Turbocharger Compressors
Presented At: ASME Turbo Expo 2018
- Improved Smith Chart for Axial Compressor Design
Presented At: ASME Turbo Expo 2018
- Atypical Fluid Behavior on the Liquid Side of the Saturation Line of CO2 With Implications for Compressor Design
Presented At: The 6th International Supercritical CO2 Power Cycles Symposium 2018
- A Consideration for Trading Regenerator Size with Turbine Improved Efficiency in SCO2Systems to Enable a More Economical SCO2 System
Presented At: The 6th International Supercritical CO2 Power Cycles Symposium 2018
- Novel Flow-wise Grooves in Radial Turbomachines
Presented At: ISROMAC 2017
- Harmonic Analysis of Diffuser Inlet Static Pressure Distortion for Centrifugal Stages
Presented At: ISROMAC 2017
- Comparison of R134a and R1234ze for New Chiller Systems and for Fluid (Drop-In) in Existing Systems
Presented At: The 2017 Chinese Association of Refrigeration
- An Investigation Into The Variation Of Centrifugal Compressor Sensitivity To Inlet Swirl With Initial Form Parameter Selection
Presented At: ASME Turbo Expo 2016 - Turbomachinery Technical Conference and Exposition
- Manufacturing Considerations In The Initial Design Process
Presented At: ASME Turbo Expo 2016 - Turbomachinery Technical Conference and Exposition - Meanline Modeling Of A Radial-Inflow Turbine Nozzle With Supersonic Expansion
Presented At: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition - Radial Stages With Non-Uniform Pressures At Diffuser Inlet
Presented At: ASME Turbo Expo 2016 - Turbomachinery Technical Conference and Exposition - High Suction Performance Pumps With Large Inlet Blade Angles And An Integrated Stability Control Device
Presented At: 2016 AIAA Propulsion and Energy Forum and Exposition - CO2 Capture And Sequestration By Integrating Pressure Swing Adsorption With An Open Cycle Supercritical CO2 System- (Presentation Slides)
Presented At: UKC 2016 - A Novel Non-Radial Turbocharger Turbine Created Using Numerical Optimisation
Presented At: National Laboratory of Engine Turbocharging Technology of China 2016 - A Comprehensive Throughflow Solver Method For Modern Turbomachinery Design
Presented At: ASME Turbo Expo 2015 - Turbomachinery Technical Conference and Exposition - Gas Turbine Engine Exhaust Waste Heat Recovery Using Supercritical CO2 Brayton Cycle With Thermoelectric Generator Technology
Presented At: ASME International Conference on Energy Systems (Power & Energy) 2015 - Development And Testing Of A 250 kWe ORC System Using An Integrated Axial Turbine And High-Speed Generator For 3.7 Bar, A Condensing Steam
Presented At: ASME ORC 2015 - Gas Turbine Waste Heat Recovery Using A 20,000 RPM, Sealless, Turbine Generator/ORC System
Presented At: Symposium of the Industrial Application of Gas Turbines 2015 - Validation Results For A Diverse Set Of Turbomachinery Cases Using A Density-Based OpenFOAM® Solver
Presented At: ASME Turbo Expo 2014 - The Development Of A Langrangian Dynamics Model Of An Oscillating Water Column (OWC), Wave Energy Converter (WEC)
Presented At: OCEANS MTS/IEE 2014 - Eliminating Engine Performance Degradation Over Time Through Compressor Redesign
Presented At: SAE 2013 World Congress & Exhibition - Designing Turbochargers with an Integrated Design System
Presented At: ASME Turbo Expo 2013 - Turbocharging the Internal Combustion Engine - (Presentation Slides)
Presented At: ASME Turbo Expo 2013 - Development Of A 300 kWe Integrated Axial Turbine And Generator For ORC Applications - (Presentation Slides)
Presented At: ASME ORC 2013 - Aero Design Challenges in Wide-Operability Turbocharger Centrifugal Compressors
Presented At: SAE World Congress 2012 - Meanline Modeling of Ported Shroud Turbocharger Compressor
Presented At: ASME Turbo Expo 2012 - Meanline Modeling of Radial Inflow Turbine with Twin-entry Scroll
Presented At: ASME Turbo Expo 2012 - Gas Turbine Engine Exhaust Waste Heat Recover Navy Shipboard Module Development
Presented At: The Supercritical CO2 Power Cycle Symposium - Experimental and Computational Analysis of Impact of Self Recirculation Casing Treatment on Turbocharger Compressor Presented At: SAE World Congress 2010
- Modeling and Manufacturing of Turbocharger Compressors
Presented At: SAE World Congress 2010 - Turbocharger Turbine Pulse Flow Performance and Modeling - 25 Years On
Presented At: IMechE - 9th International Conference on Turbochargers and Turbocharging 2010 - Analysis and Validation of a Unified Slip Factor for Impellers at Design and Off-Design Conditions
Presented At: ASME Turbo Expo 2010 - Numerical Characterization of the Inlet Flow for Eleven Radial Turbomachines
Presented At: ASME Turbo Expo 2010 - The Mixed Flow Forward Swept Turbine for Next Generation Turbocharged Downsized Automotive Engines
Presented At: ASME Turbo Expo 2010 - An Integrated Design System for Turbomachinery
Presented At: The 9th International Conference on Hydrodynamics 2010